FT3 gas mass flow meters

FT3 gas mass flow meters

FT3 gas mass flow meters

0 In stock
€0.00
application:

this thersmodispersal mass flow meter designed for measuring of mass flow and temperature of compressed air, nitrogen, biogas, digestar gas, methane, mixed composition gases other fuel gases.

Advantage: insitu callibration routine CAL-V™ and Zero CAL-CHECK™ tests can give you the reassurance that your meter is performing accurately in the field  without the need to interrupt flow or send the meter back to the factory.

display: 2 lines, 16 characters with backlit 
probe length:

40 ÷ 900mm (4" ÷ 36")

recommended probe size:
  • DN40 ÷ 50: 4"
  • DN65 ÷ 150: 6"
  • DN200 ÷ 300: 9"
  • DN350 ÷ 450: 12"
measuring range:
  • DN40, 0 ÷ 1320 NM3/h
  • DN50, 0 ÷ 2200 NM3/h
  • DN80, 0 ÷ 4860 NM3/h
  • DN100, 0 ÷ 8360 NM3/h
  • DN150, 0 ÷ 18900 NM3/h
  • DN200, 0 ÷ 32800 NM3/h
  • DN300, 0 ÷ 73500 NM3/h
accuracy: ≤ ±0.2% FS or ±1% from actual value
repeatability: ≤ ±0.2% FS 
response time: 0.9 sec.
supply voltage: 24VDC or 85 ÷ 260VAC (option)
output:
  • 2 x 4 ÷ 20mA (flow and temperature)
  • 1 x frequency, 0 ÷ 100 Hz (open collector), 5 ÷ 24V, 10mA or could be uses as alarm
input: 1 x digital to reset elapsed time, flow totalizer and switch between gas curves when the 2 gas curve option is ordered
temperature: -40 ÷ 121ºC (343ºC)
pressure: 34bar
material: stainless st. 316, Hastelloy C276 (option)
process connection: 3/4"NPT (adjusting fitting)
communication: USB, ModBus RS485, HART
programinig software UFT3 View™ (provides complete configuration, remote process monitoring, and data logging functions)
protection class: CE, ATEX, II 2 G Ex d IIB + H2 (T6, T4 or T1*); Gb Ta = -20°C to 70°C; IP67 / II 2 D Ex tb IIIC (T85°C, T135°C or T450°C*) Db Ta = -20°C to 70°C; IP67
ordering codes: 
  • FT3 gas mass flow meter for biogas with display, 4"(pipe Ø40 ÷ 50mm) probe, 2 x 4 ÷ 20mA+1 relay, 3/4"NPT, 24VDC, code:  FT3-4I-SS-ST-E1-DD-B0-G5
  • FT3 gas mass flow meter for biogas with display, 6"(pipe Ø65 ÷ 150mm) probe, 2 x 4 ÷ 20mA+1 relay, 3/4"NPT, 24VDC, code:  FT3-6I-SS-ST-E1-DD-B0-G5
  • FT3 gas mass flow meter for biogas with display, 9"(pipe Ø200 ÷ 300mm) probe, 2 x 4 ÷ 20mA+1 relay, 3/4"NPT, 24VDC, code:  FT3-9I-SS-ST-E1-DD-B0-G5
  • FT3 gas mass flow meter for biogas with display, 12"(pipe Ø350 ÷ 450mm) probe, 2 x 4 ÷ 20mA+1 relay, 3/4"NPT, 24VDC, code:  FT3-12I-SS-ST-E1-DD-B0-G5